Crosley Washer NLPWD15 User Manual

Crosley®  
TUMBLE ACTION WASHER  
Use & Care Guide  
LAVADORACON TAMBOREACCIÓN  
Manual de Uso & Mantenimiento  
P/N 134874800 (0702)  
 
Important Safety Instructions  
SAVE THESE INSTRUCTIONS  
Read all instructions before using this washer.  
You can be killed or seriously injured if you don't follow these Important Safety Instructions:  
• Failure to comply with these warnings could result in serious personal injuries.  
Prevent Fire  
• Do not wash items that have been previously cleaned in, soaked in, or spotted with gasoline, cleaning solvents, kerosene,  
cooking oils, waxes, etc. Do not store these items on or near the washer. These substances give off vapors or chemical  
reactions that could ignite or explode.  
• Do not put oily or greasy rags or clothing on top of the washer. These substances give off vapors that could ignite the  
materials.  
•Do not add gasoline, cleaning solvents, or other flammable or explosive substances to the wash water. These substances  
give off vapors that could ignite or explode.  
• Under certain conditions, hydrogen gas may be produced in a hot water system that has not been used for 2 weeks or  
more. HYDROGEN GAS IS EXPLOSIVE. If the hot water system has not been used for such a period, before using the  
washer, turn on all hot water faucets and let the water flow from each for several minutes. This will release any  
accumulated hydrogen gas. Hydrogen gas is flammable; do not smoke or use an open flame during this time.  
• Do not store or use gasoline or other flammable vapors or liquids in the vicinity of this or any other appliance.  
• Failure to comply with these warnings could result in fire, explosion, serious bodily injury and/or damage to the rubber or  
plastic parts of the washer.  
ProtectChildren  
• Do not allow children to play on or in the washer. Close supervision of children is necessary when the washer is used near  
children. As children grow, teach them the proper, safe use of all appliances.  
• Destroy the carton, plastic bag and other packing materials after the washer is unpacked. Children might use them for  
play. Cartons covered with rugs, bedspreads or plastic sheets can become airtight chambers.  
• Keep laundry products out of children's reach. To prevent personal injury, observe all warnings on product labels.  
• Before the washer is removed from service or discarded, remove the washer door to prevent accidental entrapment.  
• Failure to comply with these warnings could result in serious personal injuries.  
PreventInjury  
• To prevent shock hazard and assure stability during operation, the washer must be installed and electrically grounded by a  
qualified service person in accordance with local codes. Installation instructions are packed in the washer for installer's  
reference. Refer to INSTALLATION INSTRUCTIONS for detailed grounding procedures. If the washer is moved to a new  
location, have it checked and reinstalled by a qualified service person.  
• To prevent personal injury or damage to the washer, the electrical power cord of the washer must be plugged into a  
properly grounded and polarized 3-prong outlet. The third grounding prong must never be removed. Never ground the  
washer to a gas pipe. Do not use an extension cord or an adaptor plug.  
• Follow package directions when using laundry products. Incorrect usage can produce poisonous gas--resulting in serious  
injury or death.  
-
-
Do not combine laundry products for use in 1 load unless specified on the label.  
Do not mix chlorine bleach with ammonia or acids such as vinegar.  
• To prevent serious personal injury and damage to the washer:  
-
All repairs and servicing must be performed by an authorized servicer unless specifically recommended in this  
Owner's Guide. Use only authorized factory parts.  
-
-
-
Do not tamper with controls.  
Do not install or store the washer where it will be exposed to the weather.  
Do not install on carpet. Install washer on a solid floor. It may be necessary to reinforce the floor to prevent vibration or  
movement.  
• To reduce the risk of electric shock, disconnect this appliance from the power supply before attempting any user  
maintenance. Turning the controls to the OFF position does not disconnect this appliance from the power supply.  
• To prevent injury, do not reach into the washer while parts are moving. Before loading, unloading or adding items, push in  
the cycle selector knob and allow the drum to coast to a complete stop before reaching inside.  
• Failure to comply with these warnings could result in serious personal injuries.  
• This washer is equipped with an electrical overload protector. The motor will stop if it becomes overheated. The washer will  
automatically restart after a cool down period of up to 30 minutes, if the washer has not been manually turned off during this  
time.  
Printed in U.S.A.  
3
 
Important Safety Instructions  
                                                                                           
(
                                                                                           
                                                                                             
c
                                                                                             
                                                                                              
o
                                                                                              
                                                                                                
n
                                                                                                
                                                                                                   
t
                                                                                                   
                                                                                                    
i
                                                                                                    
                                                                                                     
n
                                                                                                     
                                                                                                       
u
                                                                                                       
                                                                                                         
e
                                                                                                          
                                                                                                           
d
                                                                                                            
                                                                                                              
)
                                                                                                              
Do not under any  
Grounding type  
Avoid fire hazard or  
wall receptacle  
circumstances, cut,  
remove, or bypass the  
grounding prong from  
Power supply cord with 3-prong  
grounding plug  
electrical shock. Do not use an  
adaptor plug or extension cord or  
remove grounding prong from  
electrical power cord. Failure to  
follow this warning can cause  
serious injury, fire or death.  
this plug.  
CORRECT  
Use this way ONLY  
Do not use or mix  
liquid chlorine bleach with other  
household chemicals such as toilet  
cleaners, rust removers, acid or  
products containing ammonia. These  
mixtures can produce dangerous  
fumes which can cause serious injury  
or death.  
Note: The instructions appearing in  
this Owner's Guide are not meant to  
cover every possible condition and  
situation that may occur. Common  
sense and caution must be practiced  
when installing, operating and  
maintaining any appliance.  
Follow the guidelines below for preparing the wash load.  
Read the Operating Instructions for operating your specific model.  
Always read and follow fabric care and laundry product labels.  
Washing Procedures  
To reduce the risk of fire, electrical shock, or injury to persons, read  
Important Safety Instructions before operating this washer.  
1. Sort laundry into loads that can be washed together.  
Sort items by recommended water temperatures and wash time.  
Separatewhite,light,andcolorfastitemsfromdarkandnoncolorfastitems.  
Separate items which shed lint from items which attract lint. Permanent  
press, synthetic, knit and corduroy items will pick up lint from towels, rugs  
and chenille bedspreads.  
Sort laundry into loads that can be washed  
together.  
Separate heavily soiled items from lightly soiled items.  
Separate lacy, sheer and loosely knit items from sturdy items.  
Do not machine wash items containing fiberglass. Small particles of  
fiberglass left in the drum may stick to fabrics in other loads and cause skin  
irritation.  
2. Prepare items for washing.  
Empty pockets.  
Brush off lint and dirt. Shake out rugs and beach towels.  
Closezippers,fastenhooks,tiestringsandsashes,andremovenonwashable  
trims and ornaments.  
Empty pockets.  
Removepins,decorativebuttons,beltbuckles,andotherobjectswhichcould  
be damaged. This also helps protect other items in the wash load.  
Mend rips and tears to prevent further damage during washing.  
Placedelicateitemssuchasbras, shoulderpads, hosiery, andbeltsinamesh  
bag to prevent tangling during the wash cycle.  
Turn knit items inside out to prevent pilling.  
3. Pretreat stains and heavy soil.  
Place delicate items in a mesh bag.  
See Stain Removal for details.  
4. Add laundry load to washer.  
Combine large and small items in a load. Load large items first. Large items  
should not be more than half the total wash load.  
Washing single items such as a sweater, towel or jeans may cause an out-of-  
balance load. Add 1 or 2 similar items to help balance the load.  
Single heavy items such as a bedspread can be washed separately.  
The washer can be fully loaded, but the items should not be tightly packed.  
The door should close easily.  
Add laundry load to washer.  
4
 
5. Add detergent, bleach and fabric softener to automatic dispenser following these steps:  
A. OPENINGANDCLOSINGTHEDISPENSERDRAWER  
C. LIQUIDBLEACH  
• Slowly open the dispenser drawer by first sliding the  
safety latch to the right, then pulling the drawer out  
until it stops.  
Afteraddinglaundryproducts,slowlyclosethedispenser  
drawer. Closing the drawer too quickly could result in  
early dispensing of bleach or fabric softener.  
• If desired, measure out the recommended amount of  
liquid chlorine bleach (not to exceed 1/3 cup (80 mL))  
and pour it into the center compartment labeled  
"Liquid Bleach" and marked with this symbol  
.
• Fill to the mininum fill line (MIN.)for small loads. Fill to  
the maximum fill line (MAX.) for large loads. Do not  
exceed the maximum fill line. Overfilling can cause  
early dispensing of the bleach which could result in  
damaged clothes.  
• Do not pour undiluted liquid chlorine bleach directly  
onto the load or into the drum. Fabric damage can  
occur.  
Note: From time to time you may see water in the  
bleach and fabric softener compartments. This is a  
result of the siphoning action and is part of the normal  
operation of the washer.  
Add powder or liquid color-safe bleach to the  
detergentdispenser.  
B. DETERGENT  
D. FABRICSOFTENER  
• Detergentisflushedfromthedispenseratthebeginning  
of the cycle. Either powdered or liquid detergent can  
be used. Note: Liquid detergent will drain into the  
washer drum as it is added.  
• Addalow-sudsing,high-efficiencydetergentmadefor  
front-loadingwasherstothedispenserchamber. Look  
• If desired, pour the recommended amount of fabric  
softener into the compartment labeled "Fabric  
Softener" and marked with this symbol  
• Fill to the mininum fill line (MIN.) for small loads. Fill  
tothemaximumfillline(MAX.)forlargeloads. Donot  
exceed the maximum fill line. Overfilling can cause  
early dispensing of the fabric softener which could  
result in stained clothes.  
.
for this symbol  
on the detergent label.  
Do not pour fabric softener directly on the wash  
load.  
• Use of a fabric softener dispensing ball is not  
Use the cap or scoop provided bythe detergent  
manufacturertomeasuretheamountrecommended.  
• Color-safebleach,waterconditioner,detergentbooster  
and enzyme products may be added to the detergent  
compartment. Avoid mixing liquids and powders.  
• Detergent usage may need to be adjusted for water  
temperature, water hardness, load size and soil level.  
• For best results, avoid oversudsing.  
recommended in tumble action washers.  
5
 
Washing Procedures Con't  
6. Selectthecycle,temperature,spinspeed,optionsandfeaturesaccording  
totype,size,andsoillevelofeachload. Startthewasher. (SeeOperating  
Instructions for your specific model.)  
7. Remove items when the cycle is completed.  
Place washed items in automatic dryer, line dry, or dry flat as directed by fabric  
care label. Excess wrinkling, color transfer or odors may develop in items left in  
the washer after the cycle has ended.  
8. GeneralPrecautions  
If the dispenser drawer is opened during operation, the washer will  
shut off. Slowly close the dispenser drawer, and press START to continue  
Donotslamthewasherdoorclosedortrytoforcethedooropenwhen  
DOOR LOCK light is on. This could result in damage to the washer.  
DO NOT leave the washer door open. An open door could entice children  
to hang on the door or crawl inside the washer. Note: If there are no small  
children present, leave the door ajar to prevent odor build up and to improve  
venting of the unit.  
• To avoid damaging the washer and personal injury, DO NOT hang on or lean  
against the washer door.  
• Do not place detergent, bleach or fabric softener containers on top of the  
washer. They can damage the finish or controls.  
As an ENERGY STAR® Partner,  
Crosley Corporation has determined  
that this product meets the ENERGY STAR®  
guidelines for energy efficiency.  
Do not store or place laundry products on  
top of washer at any time. They can  
damage the finish or controls.  
Stain Removal  
Safe Stain Removal Procedures  
Do not use or mix liquid  
chlorine bleach with other household  
chemicals such as toilet cleaners, rust  
removers, acid or products containing  
ammonia. These mixtures can produce  
dangerous fumes which can cause serious  
injury or death.  
To reduce the risk of fire or serious injury to persons or property,  
comply with the basic warnings listed below:  
• Read and comply with all instructions on stain removal products.  
• Keep stain removal products in their original labeled containers and out of  
children's reach.  
• Thoroughly wash any utensil used.  
• Do not combine stain removal products, especially ammonia and chlorine  
bleach. Dangerous fumes may result.  
• Never wash items which have been previously cleaned in, washed in, soaked  
in or spotted with gasoline, dry cleaning solvents or other flammable or  
explosive substances because they give off vapors that could ignite or explode.  
• Never use highly flammable solvents, such as gasoline, inside the home.  
Vapors can explode on contact with flames or sparks.  
For successful stain removal:  
Remove stains promptly.  
Determine the kind of stain, then follow the recommended treatment in the  
stain removal chart below.  
To pretreat stains, use a prewash product, liquid detergent, or a paste made  
from granular detergent and water.  
Use cold water on unknown stains because hot water can set stains.  
Check care label instructions for treatments to avoid on specific fabrics.  
Check for colorfastness by testing stain remover on an inside seam.  
Rinse and wash items after stain removal.  
Follow fabric care label instructions.  
6
 
Stain Removal  
STAIN  
TREATMENT  
Adhesive tape, chewing  
gum, rubber cement  
Apply ice. Scrape off excess. Place stain face down on paper towels. Saturate with prewash stain  
remover or nonflammable dry cleaning fluid.  
Baby formula, dairy  
products, egg  
Use product containing enzymes to pretreat or soak stains. Soak for 30 minutes or more. Wash.  
Pretreat stain. Wash using cold water and bleach safe for fabric.  
Beverages (coffee, tea,  
soda,juice, alcoholic  
beverages)  
Blood  
Rinse with cold water. Rub with bar soap. Or, pretreat or soak with product containing enzymes. Wash  
using bleach safe for fabric.  
Candle wax, crayon  
Scrape off surface wax. Place stain face down between paper towels. Press with warm iron until wax is  
absorbed. Replace paper towels frequently. Treat remaining stain with prewash stain remover or  
nonflammable dry cleaning fluid. Hand wash to remove solvent. Wash using bleach safe for fabric.  
Chocolate  
Pretreat or soak in warm water using product containing enzymes. Wash using bleach safe for fabric.  
Pretreat with prewash stain remover or rub with bar soap.  
Collar or cuff soil,  
cosmetics  
Dye transfer on white fabric  
Grass  
Use packaged color remover. Wash using bleach safe for fabric.  
Pretreat or soak in warm water using product containing enzymes. Wash using bleach safe for fabric.  
Grease, oil, tar (butter, fats,  
salad dressing, cooking  
oils, car grease, motor oils)  
Scrape residue from fabric. Pretreat. Wash using hottest water safe for fabric. For heavy stains and tar,  
apply nonflammable dry cleaning fluid to back of stain. Replace towels under stain frequently. Rinse  
thoroughly. Wash using hottest water safe for fabric.  
Ink  
Some inks may be impossible to remove. Washing may set some inks. Use prewash stain remover,  
denatured alcohol or nonflammable dry cleaning fluid.  
Mildew, scorch  
Wash with chlorine bleach if safe for fabric. Or, soak in oxygen bleach and hot water before washing.  
Badly mildewed fabrics may be permanently damaged.  
Mud  
Brush off dry mud. Pretreat or soak with product containing enzymes.  
Pretreat with prewash stain remover. Wash using bleach safe for fabric.  
Mustard, tomato  
Nail polish  
May be impossible to remove. Place stain face down on paper towels. Apply nail polish remover to  
back of stain. Repeat, replacing paper towels frequently. Do not use on acetate fabrics.  
Paint, varnish  
Perspiration  
WATER BASED: Rinse fabric in cool water while stain is wet. Wash. Once paint is dry, it cannot be  
removed. OIL BASED AND VARNISH: Use solvent recommended on can label. Rinse thoroughly before  
washing.  
Use prewash stain remover or rub with bar soap. Rinse. Wash using nonchlorine bleach in hottest  
water safe for fabric.  
Rust, brown or yellow  
discoloration  
For spots, use rust remover safe for fabric. For discoloration of an entire load, use phosphate detergent  
and nonchlorine bleach. Do not use chlorine bleach because it may intensify discoloration.  
Shoe polish  
LIQUID: Pretreat with a paste of granular detergent and water. PASTE: Scrape residue from fabric.  
Pretreat with prewash stain remover or nonflammable dry cleaning fluid. Rinse. Rub detergent into  
dampened area. Wash using bleach safe for fabric.  
Urine, vomit, mucus, feces  
Pretreat or soak in product containing enzymes. Wash using bleach safe for fabric.  
7
 
Common Washing Problems  
Many washing problems involve poor soil and stain removal, residues of lint and scum, and fabric damage. For  
satisfactory washing results, follow these suggestions provided by The Soap and Detergent Association.  
PROBLEM POSSIBLE CAUSES  
SOLUTIONS  
PREVENTIVE MEASURES  
Blue stains  
•Undiluted liquid detergent or  
fabric softener dispensed directly  
onto fabric.  
•If caused by detergent, mix 1 cup (240  
ml) white vinegar with 1 quart (.95 L)  
water in a plastic container. Soak item 1  
hour. Rinse.  
•Avoid overfilling detergent and fabric  
softener compartments of dispenser.  
•If caused by fabric softener, rub stains  
with bar soap. Wash.  
Discoloration,  
graying  
•Not enough detergent.  
•Wash water temperature too low.  
•Incorrect sorting.  
•Rewash with correct amount of  
detergent and hottest water safe for  
fabric. Add bleach safe for fabric.  
•Sort items by soil level and color.  
•Use correct amount of detergent, hottest  
water and bleach safe for fabric.  
Greasy, oily stains •Not enough detergent.  
•Undiluted liquid fabric softener  
poured directly on fabric.  
•Treat with prewash stain remover or  
liquid detergent.  
•Increase detergent and water  
temperature. Rewash.  
•Use correct amount of detergent and  
hottest water safe for fabric.  
•Do not pour liquid fabric softener directly on  
fabric. See Washing Procedures for  
directions on adding softener.  
•Rub fabric softener stains with bar soap.  
Holes, tears, or  
snags  
•Incorrect use of chlorine bleach.  
•Unfastened zippers, hooks,  
buckles.  
•Rips, tears and broken threads.  
•Overloading the washer.  
•Degradation of fabric.  
•May be irreversible if rips, tears and  
seams cannot be mended.  
•Never pour chlorine bleach directly on  
fabric.  
•Check condition of items before washing.  
See Washing Procedures for preparing  
and loading the wash load and adding  
chlorine bleach.  
Lint  
•Incorrect sorting.  
•Reduce load size. Rewash using correct •See Washing Procedures for sorting and  
•Tissues left in pocket.  
•Overloading the washer.  
•Not enough detergent.  
•Undissolved detergent has left  
a residue resembling lint.  
•Static cling is attracting lint.  
•Load washed too long.  
water temperature, water level, and  
amount of detergent.  
preparing the wash load.  
•Do not overload washer.  
•Use correct temperature and amount of  
detergent, water and wash time.  
•Add nonprecipitating water conditioner  
to wash water to remove detergent  
residue.  
•Add liquid fabric softener to final rinse.  
•Dry load in dryer.  
•Remove lint with lint brush or roller.  
Pilling  
•Pilling is normal with synthetic  
and permanent press fabrics.  
This is due to abrasion from  
normal wear.  
• Use a lint brush or shaver to remove  
pills.  
•Use fabric softener in the washer to  
lubricate fibers.  
•When ironing, use spray starch or fabric  
finish on collars and cuffs.  
(Fibers break off,  
ball up and cling to  
fabric.)  
•Turn items inside out to reduce abrasion.  
Residue or  
powder on dark  
items;  
Stiff, harsh  
fabrics.  
•Undissolved detergent.  
• Some granular detergents can  
combine with hard water  
minerals to form a residue.  
•Overloading the washer.  
• Rewash load.  
•Increase water temperature using hottest  
water safe for fabric.  
•Do not overload washer.  
•Use liquid detergent or use nonprecipitating  
water conditioner with granular detergent.  
Wrinkling  
•Overloading the washer.  
•Incorrect wash cycle for wash  
load.  
•Reduce load size.  
•Do not overload washer.  
•Remove items from washer as soon as cycle  
is completed.  
•Rinse in cold water with liquid fabric  
softener using the Perm Press or Delicate  
cycle.  
•Use liquid fabric softener.  
Yellow buildup of •Agitation time too short.  
•Soak in detergent booster or product  
containing enzymes.  
•Wash in hot water using full permanent  
press cycle. Increase detergent.  
Add bleach safe for fabric.  
•Select correct wash cycle.  
•Use correct amount of detergent.  
•Wash synthetics frequently using hot or  
warm water.  
body soil on  
•Wash water temperature too low.  
synthetic fabrics •Not enough detergent.  
•Or, treat with color remover.  
Yellow or brown •Iron or manganese in water  
•To restore discolored load of whites, use  
rust remover safe for fabric.  
•Do not use chlorine bleach to remove rust  
stains. It may intensify discoloration.  
•Use nonprecipitating water softener.  
•Before washing, run hot water for a few  
minutes to clear lines.  
•Drain water heater occasionally.  
•For an ongoing problem, install an iron filter  
in your water supply system.  
rust stains  
supply, water pipes, or water  
heater.  
8
 
Care and Cleaning  
Outside  
When washing is completed, wipe top and sides of washer with a damp  
cloth. Turn water faucets off to prevent pressure build-up in the hoses.  
As needed, clean the cabinet with mild soap and water. Never use harsh,  
gritty or abrasive cleansers. If door or console becomes stained, clean with  
diluted chlorine bleach [1/2 cup (120 ml) in 1 quart (.95 L) water]. Rinse  
several times with clear water.  
Remove glue residue from tape or labels with a mixture of warm water and  
mild detergent. Or, touch residue with the sticky side of the tape or label.  
Before moving the washer, place a strip of cardboard or thin fiberboard  
under the front leveling legs to prevent floor damage.  
Figure 1  
(Lock tab is visible only after drawer has  
been pulled out)  
Cleaning the Dispenser Drawer Area  
Detergent and fabric softener may build up in the dispenser drawer. Residue  
should be removed once or twice a month.  
Remove the drawer by first sliding the safety latch to the right, then pulling  
the drawer out until it stops. (Figure 1  
Reach back into the left rear corner of the drawer cavity and press down  
firmly on the lock tab (left rear portion of the drawer). Pull out the drawer.  
(Figure 2)  
Remove the insert from the bleach and fabric softener compartments. (Figure  
3)  
Figure 2  
Rinse the drawer and inserts with hot tap water to remove traces of  
accumulated powders and liquids. Large amounts of fabric softener residue  
may indicate improper dilution or more frequent cleaning is required.  
To clean the drawer opening, use a small brush to clean the recess. Remove  
all residue from the upper and lower parts of the recess. (Figure 4)  
Replace the insert pressing the "X" to lock it in place. Return the dispenser  
drawer.  
Inside  
Remove items from the washer as soon as the cycle ends. Excess wrinkling,  
color transfer, and odors may develop in items left in the washer.  
Before cleaning the washer interior, unplug the electrical power cord to  
avoid electrical shock hazards.  
Dry around the washer door opening, flexible gasket, and door glass. These  
areas should always be clean to ensure a water tight seal.  
When extremely soiled items have been washed, a dirty residue may remain  
on the drum. Remove this by wiping the drum with a nonabrasive household  
cleanser. Rinse thoroughly with water.  
Figure 3  
Periodically, wipe dry the folds in the bottom of the flexible gasket to remove  
lint and other debris.  
The plastic drum vanes may become stained from fabric dye. Clean these  
parts with a nonabrasive household cleanser. This prevents dye transfer to  
futureloads.  
Winterizing Instructions  
If the washer is stored in an area where freezing can occur or moved in freezing  
temperatures, follow these winterizing instructions to prevent damage to the  
washer:  
Figure 4  
1. Turn off water supply faucets.  
2. Disconnect hoses from water supply and drain water from hoses.  
3. Plug electrical cord into a properly grounded electrical outlet.  
4. Add 1 gallon (3.8 L) nontoxic recreational vehicle (RV) antifreeze to empty  
wash drum. Close door.  
5. Select the Drain/Spin cycle. Press START and let the washer drain for 1  
minute to drain out all the water. Not all of the RV antifreeze will be  
expelled.  
Follow Winterizing  
Instructions for cold  
weathercare.  
6. Press Pause/Cancel twice, unplug electrical power cord, dry off drum interior  
and close door.  
7. Remove dispenser drawer. Drain any water in compartments and dry  
compartments. Replace drawer.  
8. Store washer in an upright position.  
9. To remove antifreeze from washer after storage, run empty washer through  
a complete cycle using detergent. Do not add wash load.  
9
 
Avoid Service Checklist  
Before calling for service, review this list. It may save both time and expense. The list includes common concerns that are not the result of defective  
workmanship or materials in this washer.  
OCCURRENCE  
POSSIBLE CAUSE / SOLUTION  
NOISE  
High pitch "jet engine" noise.  
• A certain amount of motor whine is normal during the spin cycle.  
Rattling and clanking noise.  
• Foreign objects such as coins or safety pins may be in drum or pump. Stop washer and check  
drum. If noise continues after washer is restarted, objects may be in pump. Call your  
authorized servicer.  
• Belt buckles and metal fasteners are hitting wash drum. To prevent unnecessary noise and  
damage to drum, fasten fasteners and turn items inside out.  
Squealing sound or hot rubber odor.  
• Washer is overloaded. Do not overload washer. Stop washer and reduce load.  
• Heavy wash loads may produce a thumping sound. This is usually normal. If sound continues,  
washer is probably out of balance. Stop washer and redistribute wash load.  
Thumping sound.  
Vibrating noise.  
• Washer is not resting firmly on floor. Move washer so it rests firmly on floor. Adjust leveling  
legs and tighten lock nuts. See INSTALLATION INSTRUCTIONS for details.  
• Shipping bolts and foam block have not been removed during installation. See INSTALLATION  
INSTRUCTIONS for removing shipping bolts and foam block.  
• Wash load unevenly distributed in drum. Stop washer and rearrange wash load.  
OPERATING  
• Electrical power cord may not be plugged in or connection may be loose. Make sure plug fits tightly  
in wall outlet.  
Washer does not start.  
• House fuse blown, circuit breaker tripped, or a power outage has occurred. Reset circuit breaker  
or replace fuse. Do not increase fuse capacity. If problem is a circuit overload, have it corrected by  
a qualified electrician. If problem is a power outage, call local electric company.  
• Water supply faucets are not turned on. Turn on water supply faucets.  
• Motor is overheated. Washer motor will stop if it becomes overheated. It will automatically restart  
after a cool down period of up to 30 minutes (if washer has not been manually turned off).  
• Dispenser drawer is open. Close drawer.  
• Washer door is not completely closed. Close door completely.  
• Load is too small. Add 1 or 2 similar items to help balance the load.  
• Dispenser drawer is open. Close drawer.  
Washer won't spin.  
Residue left in drum.  
• Heavily soiled items. Wipe drum with a nonabrasive household cleanser, then rinse. Shake or brush  
excess dirt and sand from items before washing  
WATER  
Water collects in folds of the  
bellows at the end of the cycle.  
This is a result of the washing action and is part of the normal operation of the washer.  
Water collects in bleach and fabric softener  
compartments.  
• This is a result of the siphoning action and is part of the normal operation of the washer. Water  
may be removed by removing the dispenser drawer (see Page 9, Figures 1 and 2) and draining  
water into the empty drum or sink.  
Wash load too wet after spin.  
• Washer is overloaded. Do not overload washer. See Washing Procedures.  
• Load is too small. Add 1 or 2 similar items to help balance the load.  
• Load is out of balance. Rearrange load to allow proper spinning.  
• Drain hose is kinked. Straighten drain hose.  
Water does not enter washer or it enters  
slowly.  
• Water supply is not adequate in area. Check another faucet in the house. Wait until water supply  
and pressure increase.  
• Water supply faucets are not completely open. Fully open hot and cold faucets.  
• Water is being used elsewhere in the house. Water pressure must be at least 30 psi (260 kPa).  
Avoid running water elsewhere while washer is filling.  
• Water inlet hoses are kinked. Straighten hoses.  
Warm or hot water is not hot enough.  
• Hot water heater is set too low or is a distance from washer. Measure hot water temperature at  
nearby faucet with candy or meat thermometer. Water temperature should be at least 120°F  
(49°C). Adjust water heater as necessary.  
• Hot water is being used elsewhere in the house. Avoid using hot water elsewhere before or during  
washer use. There may not be enough hot water available for proper cleaning. If problem persists,  
your hot water system may be unable to support more than 1 use at a time.  
Water in washer does not drain or drains  
slowly.  
• Drain hose is kinked or clogged. Clean and straighten the drain hose.  
• Maximum standpipe height is 8' (2.4 m).  
• House drain pipes are clogged. Unclog drain pipes. Contact plumber if necessary.  
• Fill hose connection is loose at faucet or washer. Check and tighten hose connections. Install rubber  
sealing washers provided.  
Water leaks.  
• Wrong detergent. Run rinse cycle. Use a low-sudsing, high efficiency detergent.  
• Too much detergent. Run rinse cycle. Use less detergent in future loads  
Oversudsing.  
• Hot and cold water hoses are connected to wrong supply faucets. Connect hot water hose to hot  
water faucet and cold water hose to cold water faucet.  
Incorrect wash and rinse temperatures.  
• Drain hose standpipe is incorrect height. Standpipe must be a minimum of 23.6" (60 cm) high to  
prevent siphoning. See INSTALLATION INSTRUCTIONS.  
Water is entering washer but tub does not  
fill.  
10  
 
CROSLEY® WASHER WARRANTY  
Your appliance is covered by a one year limited warranty. For one year from your original date ofpurchase, Electrolux will pay  
allcostsforrepairingorreplacinganypartsofthisappliancethatprovetobedefectiveinmaterialsorworkmanshipwhensuch  
appliance is installed, used and maintained inaccordance with the provided instructions.  
Exclusions  
This warranty does not cover the following:  
1. Products with original serial numbers that have been removed, altered or cannot be readily determined.  
2. Product that has been transferred from its original owner to another party or removed outside the USA or  
Canada.  
3. Rust on the interior or exterior of the unit.  
4. Products purchased "as-is" are not covered by this warranty.  
5. Food loss due to any refrigerator or freezer failures.  
6. Products used in a commercial setting.  
7. Service calls which do not involve malfunction or defects in materials or workmanship, or for appliances not  
in ordinary household use or used other than in accordance with the provided instructions.  
8. Service calls to correct the installation of your appliance or to instruct you how to use your appliance.  
9. Expenses for making the appliance accessible for servicing, such as removal of trim, cupboards, shelves,  
etc.,which are not a part of the appliance when it is shipped from the factory.  
10. Service calls to repair or replace appliance light bulbs, air filters, water filters, other consumables, or knobs,  
handles, or other cosmetic parts.  
11. Surcharges including, but not limited to, any after hour, weekend, or holiday service calls, tolls, ferry trip  
charges, or mileage expense for service calls to remote areas, including the state of Alaska.  
12. Damages to the finish of appliance or home incurred during installation, including but not limited to  
floors,cabinets, walls, etc.  
13. Damages caused by: services performed by unauthorized service companies; use of parts other  
than genuine Electrolux parts or parts obtained from persons other than authorized service companies;  
or external causes such as abuse, misuse, inadequate power supply, accidents, fires, or acts of God.  
DISCLAIMEROFIMPLIEDWARRANTIES;LIMITATIONOFREMEDIES  
CUSTOMER’SSOLEANDEXCLUSIVEREMEDYUNDERTHISLIMITEDWARRANTYSHALLBE  
PRODUCTREPAIRORREPLACEMENTASPROVIDEDHEREIN. CLAIMSBASEDONIMPLIED  
WARRANTIES,INCLUDINGWARRANTIESOFMERCHANTABILITYORFITNESSFORAPARTICULAR  
PURPOSE, ARELIMITED TO ONE YEAR OR THE SHORTEST PERIOD ALLOWED BY LAW, BUT NOT  
LESSTHANONEYEAR.ELECTROLUXSHALLNOTBELIABLEFORCONSEQUENTIALORINCIDENTAL  
DAMAGESSUCHASPROPERTYDAMAGEANDINCIDENTALEXPENSESRESULTINGFROMANY  
BREACHOFTHISWRITTENLIMITEDWARRANTYORANYIMPLIEDWARRANTY.SOMESTATESAND  
PROVINCESDONOTALLOWTHEEXCLUSIONORLIMITATIONOFINCIDENTALORCONSEQUENTIAL  
DAMAGES,ORLIMITATIONSONTHEDURATIONOFIMPLIEDWARRANTIES,SOTHESELIMITATIONS  
OREXCLUSIONSMAYNOTAPPLYTOYOU.THISWRITTENWARRANTYGIVESYOUSPECIFICLEGAL  
RIGHTS. YOU MAY ALSO HAVE OTHER RIGHTS THAT VARY FROM STATE TO STATE.  
If You Need  
Service  
Keep your receipt, delivery slip, or some other appropriate payment record to establish the warranty  
periodshould service be required. If service is performed, it is in your best interest to obtain and keep all  
receipts.Service under this warranty must be obtained by contacting Electrolux at the addresses or  
phonenumbersbelow.  
This warranty only applies in the USA and Canada. In the USA, your appliance is warranted by Electrolux Major Appliances  
NorthAmerica,adivisionofElectroluxHomeProducts,Inc.InCanada,yourapplianceiswarrantedbyElectroluxCanadaCorp.  
Electroluxauthorizesnopersontochangeoraddtoanyobligationsunderthiswarranty.Obligationsforserviceandpartsunder  
thiswarrantymustbeperformedbyElectroluxoranauthorizedservicecompany.Productfeaturesorspecificationsasdescribed  
or illustrated are subject to change without notice.  
Replacement parts  
If you need to order replacement parts, we recommend that you only use the factory specified parts. These parts will fit right  
and work right because they are made with the same precision used to build every new Crosley ® appliance.  
To locate factory specified replacement parts in you area call:  
USA, 1-800-944-9044, or your nearest desinated service center. In Canada call 1-800-668-4606.  
For information on how to contact Crosley Corporation, please see page 2 of this document.  
11  
 

Cobra Electronics Camera Accessories FRS235 User Manual
Creda Cooktop W810 User Manual
Cub Cadet Lawn Mower 20HP Enforcer 44 22HP Enforcer 48 23HP Enforcer 54 User Manual
Cuisinart Coffee Grinder DGB 300 User Manual
Curtis CRT Television TVD2002 B User Manual
Danby Freezer DCF550W1 User Manual
D Link Network Router Wireless AC1750 User Manual
Fisher Price Motorized Toy Car W9257 User Manual
Frigidaire Convection Oven FPGF3081K F User Manual
GE Dishwasher gdt510 540 User Manual