POLES
STS SQUARE TAPERED STEEL
20' —39' MOUNTING HEIGHT
4
MH
3
(mounting height)
SPECIFICATION FEATURES
...
2
1
...
1
2
3
ASTM Grade steel base plate with ASTM A366 base cover.
Hand hole assembly 3" x 5" on STS poles.
5
Anchor bolt per ASTM A576 with (2) nuts, (2) flat washer,
and (1) lock washer. Nuts, washers and threaded portion
of bolt are hot dip galvanized. 3" hook for 3/4" bolt.
4" hook for 1" bolt.
handhole
12 5/16 "
...
...
Steel shaft 55,000 PSI. Shot blasted and painted with
polyester powder coat.
B
S
...
4
Drilled or Tenon (specify).
Base View
FOUR BOLT ANCHORAGE [ See ordering information]
BC=Bolt Circle
BP=Bolt Projection
AB=Bolt Dimensions
D=Bolt Diameter
H=Bolt Dimensions
BC
D
FINISH COLORS [ See ordering information]
BP
AB
5
F=Dark Bronze
G=Galvanized
V=Grey
W=White
Y=Black
H
WARNING: THE USE OF UNAUTHORIZED ACCESSORIES SUCH AS BANNERS, SIGNS OR PENNANTS FOR WHICH THE POLE WAS NOT DESIGNED FOR VOIDS THE COOPER LIGHTING
WARRANTY AND MAY RESULT IN POLE FAILURE CAUSING SERIOUS INJURY OR PROPERTY DAMAGE. COOPER LIGHTING'S POLE WARRANTY IS ALSO VOIDED IF
LUMINAIRE IS NOT INSTALLED AT TIME OF POLE INSTALLATION.
174 STREETWORKS Outdoor Lighting Solutions
Cooper Lighting
|