Owner’s manual
Mode d’emploi
1. PRECAUTIONS
1. When the inside of the car is very cold and
the player is used soon after switching on
the heater, moisture may form on the disc
or the optical parts of the player and proper
playback may not be possible. If moisture
forms on the disc, wipe it off with a soft
cloth. If moisture forms on the optical parts
of the player, do not use the player for about
one hour and the condensation will disap-
pear naturally to allow normal operation.
This equipment has been tested and found to
comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reason-
able protection against harmful interference in
a residential installation. This equipment gen-
erates, uses, and can radiate radio frequency
energy and, if not installed and used in accor-
dance with the instructions, may cause harmful
interference to radio communications.
However, there is no guarantee that interfer-
ence will not occur in a particular installation. If
this equipment does cause harmful interfer-
ence to radio or television reception, which can
be determined by turning the equipment off
and on, the user is encouraged to consult the
dealer or an experienced radio/TV technician
for help.
Manual de instrucciones
2. Driving on extremely bumpy roads which
cause severe vibration may cause the
sound to skip.
■Contents
English
1. PRECAUTIONS...........................................................2
2. CONTROLS.................................................................3
3. FEATURES..................................................................4
4. DCP (Detachable Control Panel)..............................4
5. HANDLING COMPACT DISCS...................................5
6. BUTTON TERMINOLOGY..........................................6
7. REMOTE CONTROL (RDX555D only) ......................7
8. OPERATION................................................................9
9. TROUBLESHOOTING ..............................................16
10.SPECIFICATIONS.....................................................17
3. This unit uses a precision mechanism.
Even in the event that trouble arises, never
open the case, disassemble the unit, or
lubricate the rotating parts.
RDX555D
RDX455D
CAUTION
■Table des matières
Français
USE OF CONTROLS, ADJUSTMENTS, OR PERFORMANCE OF PROCEDURES OTHER THAN
THOSE SPECIFIED HEREIN, MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.
THE COMPACT DISC PLAYER SHOULD NOT BE ADJUSTED OR REPAIRED BY ANYONE
EXCEPT PROPERLY QUALIFIED SERVICE PERSONNEL.
AM/FM CD PLAYER
WITH CD/MD CHANGER CONTROL
•
1. PRÉCAUTIONS.........................................................19
2. COMMANDES.............................................................3
3. CARACTÉRISTIQUES..............................................20
4. CLAVIER DE COMMANDE AMOVIBLE (DCP) .......20
5. MANIPULATION DES DISQUES COMPACTS ........21
6. NOMENCLATURE DES TOUCHES .........................22
7. TÉLÉCOMMANDE (RDX555D uniquement)...........23
8. FONCTIONNEMENT.................................................25
9. DÉPISTAGE DES PANNES......................................32
10.SPÉCIFICATIONS.....................................................33
RADIO AM/FM-LECTEUR CD
AVEC PILOTAGE DE CHANGEUR CD/MD
•
RADIO AM/FM Y REPRODUCTOR CD
CON CONTROL DE CAMBIADOR DE CD/MD
MODEL
MODEL
RDX555D
RDX455D
12V GROUND
12V
GROUND
AM 530-1710kHz/FM 87.9-107.9MHz
AM 530-1710kHz/FM 87.9-107.9MHz
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES.OPERA-
TION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: (1) THIS
DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND (2) THIS
DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING
INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION.
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES.OPERA-
TION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: (1) THIS
DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND (2) THIS
DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING
INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION.
■Índice
Español
THIS PRODUCTION COMPLIES DHHS RULES 21 CFR SUBCHAPTER
APPLICABLE AT DATE OF MANUFACTURE.
J
THIS PRODUCTION COMPLIES DHHS RULES 21 CFR SUBCHAPTER
APPLICABLE AT DATE OF MANUFACTURE.
J
or
CLARION CO.,LTD.
50 KAMITODA,TODA-SHI,SAITAMA-KEN,JAPAN
CLARION CO.,LTD.
50 KAMITODA,TODA-SHI,SAITAMA-KEN,JAPAN
MANUFACTURED:
MANUFACTURED:
1. PRECAUCIONES......................................................35
2. CONTROLES..............................................................3
3. CARACTERÍSTICAS ................................................36
4. PANEL DE CONTROL DESMONTABLE (DCP) ......36
5. MANEJO DE LOS DISCOS COMPACTOS..............37
6. NOMENCLATURA DE LOS BOTONES...................38
7. CONTROLADOR REMOTO (RDX555D solamente) ...39
8. OPERACIÓN.............................................................41
9. SOLUCIÓN DE PROBLEMAS..................................48
10.ESPECIFICACIONES ...............................................49
286-9166-00
Clarion Co.,Ltd.
MADE IN CHINA
286-9165-00
Clarion Co.,Ltd.
MADE IN CHINA
SERIAL No.
PE-2193B
SERIAL No.
PE-2197B
Bottom View of Source Unit
INFORMATION FOR USERS:
CHANGES OR MODIFICATIONS TO THIS PRODUCT WILL VOID THE WARRANTY AND WILL
VIOLATE FCC APPROVAL.
Clarion Co., Ltd.
All Rights Reserved. Copyright © 1999: Clarion Co., Ltd.
Printed in China / Imprimé en Chine / Impreso en China
Be sure to unfold and read the next page.
Veuillez déployer et vous référer à la page suivante.
Cerciórese de desplegar y de leer la página siguiente.
PE-2193B
PE-2197B
280-7280-01
•
1999/1 (S C)
2
5. HANDLING COMPACT DISCS
This unit has been designed specifically for play-
Note on Compact Discs
Never stick labels on the surface of the compact
disc or mark the surface with a pencil or pen.
back of compact discs bearing the
No other discs can be played.
mark.
To remove the compact disc from its storage
case, press down on the center of the case and
lift the disc out, holding it carefully by the edges.
No
Proper way to hold
the compact disc
Removing the disc
Do not use any solvents such as commercially
available cleaners, anti-static spray, or thinner to
clean compact discs.
Always handle the compact disc by the edges.
Never touch the surface.
No
To remove fingermarks and dust, use a soft
cloth, and wipe in a straight line from the center
of the compact disc to the circumference.
No
Do not use compact discs that have large
scratches, are misshapen, or cracked, etc. Use
of such discs will cause misoperation or damage.
No
New discs may have some roughness around
the edges. The unit may not work or the sound
may skip if such discs are used. Use a ball-point
pen, etc. to remove roughness from the edge of
the disc.
Ball-point pen
Roughness
Do not expose compact discs to direct sunlight
or any heat source.
No
Note:
Do not use commercially available CD protection sheets or discs equipped with stabilizers, etc. These
•
may get caught in the internal mechanism and damage the disc.
5
6. BUTTON TERMINOLOGY
Note:
Be sure to read this chapter referring to the front diagrams of chapter 2. CONTROLS on page 3 (unfold).
•
1
DCP Release Button
2
3
Up and Down (
and
) Buttons
POWER Button
FNC (Function) Button
4
5
Eject ( ) Button [
PS (Preset Station Scan) Button [
DISC Up (UP) Button [ ], [
AS (Automatic Station Store) Button [
DISC Down (DN) Button [ ], [
ISR (Instant Station Recall) Button [
]
]
]
6
]
]
7
8
9
]
Z-EHCR (z-enhancer) button [
Preset Buttons [
], [
], [
], [
]
]
10 TOP (Top Play) Button [
], [
], [
]
11 Play/Pause (
) Button [
], [
], [
], [
]
12 DISP (Display) Button
13 RDM (Random) Button [
], [
], [
]
14 RPT (Repeat Play) Button [
], [
], [
]
15 SCN (Intro Music Scan) Button [
], [
]
16 BND (Tuning Mode) Button [
MAG (Magazine) Button [
17 A-M (Audio Mode) Button
LD (Loudness) Button
]
]
18 Left and Right (
and
) Buttons
[
[
[
[
]
]
: In Radio Mode
: In CD Mode
] : In CD Changer Mode
] : In MD Changer Mode
6
7. REMOTE CONTROL (RDX555Donly)
Receiver for remote control unit
Operating range: 30° in all directions
Remote control unit
Signal transmitter
Note:
The remote control function is only available
on the RDX555D.
•
The remote control function is not provided
with the RDX455D.
Inserting the Batteries
1. Turn the remote control unit over, then slide
the rear cover in the direction of the arrow.
AA (UM-3/1.5V)
Batteries
2. Insert the AA (UM-3/1.5V) batteries that
came with the remote control unit facing in
the directions shown in the figure, then close
the rear cover.
Notes:
Using batteries improperly can cause them to explode.
Take note of the following points:
Rear cover
• When replacing batteries, replace both batteries with
new ones.
Rear side
• Do not short-circuit, disassemble or heat batteries.
• Do not dispose of batteries into fire or flames.
• Dispose of spent batteries properly.
7
Functions of Remote Control Unit Buttons
Mode
CD changer
MD changer
Radio
CD
Button
( FUNC
Turns power on and off. When pressed and held for 1 second: Turns power off.
Switches between radio, CD, CD changer and MD changer.
) BAND
Switches reception band.
Plays the first track.
Top play.
Moves the next disc in
increasing order.
DISC UP
PROG
TOP
¡ VOLUME
Increases and decreases volume (in all modes).
Moves preset channels up Moves tracks up and
™ SEARCH
Moves tracks up and
down.
and down.
down.
When pressed and held for When pressed and held for
1 second:
Fast-forward/
fast-backward.
1 second:
Fast-forward/
fast-backward.
£ PLAY/PAUSE No function.
Switches between
playback and pause.
Switches between
playback and pause.
¢ MUTE
Turns mute on and off.
Recalls ISR radio station in memory.
∞ ISR
Press and hold for more than 2 seconds: Stores current station into ISR memory
(radio mode only).
§ DISP
Switches among main display, sub display and clock display.
¶ SCAN
Preset scan.
When pressed and held for
2 seconds: Auto store.
Scan play.
Scan play.
When pressed and held for
2 seconds: Disc scan play.
PS/AS
• RPT
No function.
Repeat play.
Repeat play.
BLS
When pressed and held for
2 seconds: Disc repeat
play.
ª RDM
No function.
Random play.
Random play.
DOLBY NR
MONI
When pressed and held for
2 seconds: Disc random
play.
* Some of the corresponding buttons on the source unit and remote control unit have different functions.
8
8. OPERATION
Basic Operations
<Balance adjustment>
: The volume of the right speakers are
increased.
: The volume of the left speakers are
increased.
<Fader adjustment>
CAUTION
When this unit is turned on, starting and stop-
ping the engine of a car with its volume raised
to the maximum level may harm your hearing.
Be careful about adjusting the volume.
: The volume of the front speakers are
increased.
: The volume of the rear speakers are
increased.
Turning ON the Power and Adjusting
the Volume
1) Press the POWER button
3
.
Setting the Z-enhancer
This unit comes with three types of sound tone
effects stored in memory. Select the one you prefer.
To turn off the power, press the POWER button
*
3
for 1 second or longer.
2) Press the FNC button
operation mode. Every time the FNC button
is pressed, the display changes the oper-
3
and select another
The factory default setting is “Z-EHCR OFF”.
*
Each time you press Z-EHCR button
8
, the
3
tone effect changes in the following order.
“Z-ENHANCER 1” ➜ “Z-ENHANCER 2” ➜
“Z-ENHANCER 3” ➜ “Z-EHCR OFF” ➜
“Z-ENHANCER 1”...
• Z-ENHANCER 1: bass emphasized
• Z-ENHANCER 2: treble emphasized
ation mode as:
Radio ➜ CD ➜ CD changer ➜ MD changer
➜ Radio
Notes:
The operation mode not connected to the unit will not
be selected.
•
• Z-ENHANCER 3: bass and treble emphasized
• Z-EHCR OFF: no sound effect
If the CD mode is selected when no disc is inserted,
the display flashes “ DISC” and the mode will be
switched to the radio mode instead.
•
Loudness Effect
In order to turn on/off the loudness effect, use
3) Adjust the volume by pressing the Up/Down
2
button
.
: Sets the volume up.
: Sets the volume down.
17
the LD button
for 2 seconds or longer. Every
is pressed and held for 2
time the LD button
17
seconds or longer, the loudness effect switches
on and off.
Audio Mode Adjustments
When the loudness effect is on, the display will show
“LOUD.”
*
1) Press the A-M button 17 and select the mode
you want to adjust. Every time the A-M button
17 is pressed, the display changes as:
BASS/TRE ➜ BAL/FAD ➜ originally selected
mode
Switching the Clock Display
16
While pressing the BND button
, every time
the DISP button is pressed, the display will
change between the operation mode and the
clock display.
12
2) After selecting a mode, adjust the mode by
using either the Left/Right button 18 , or the
Up/Down button
2
.
<Bass adjustment>
: Increases the bass.
: Decreases the bass.
<Treble adjustment>
: Increases the treble.
: Decreases the treble.
Setting the Clock
16
1) While pressing the BND button
, press the
DISP button
display.
to display the clock
12
16
2) While pressing the BND button
, press and
hold the DISP button
longer.
for 2 seconds or
12
18
3) Press the Left button
hour.
, then set the current
9
18
4) Press the Right button
current minute.
, then set the
Radio Mode Operations
16
5) Press the BND button
set.
, then the clock is
FM Reception
For enhanced FM performance the
®
tuner includes signal actuated stereo control and
Multipath noise reduction circuits.
Notes:
If you select another operation mode while you are
setting the clock, the clock setting operation will be
canceled.
•
Listening to the Radio
If you remove the vehicle’s battery for a check or
repair, the clock will be reset, so you must set it again.
•
1) Press the FNC button 3 to select the radio
mode, then the radio will be on.
2) To select a preset band, press the BND but-
ton 16 , then select one of the preset bands
such as FM1, FM2, FM3, or AM. Every time
the BND button 16 is pressed, the display will
change as:
FM1 ➜ FM2 ➜ FM3 ➜ AM ➜ FM1
3) Press the Left/Right button 18 , then the sta-
tion at which there is a broadcast will be
selected (Seek selection).
Manual Tuning
1) Press the BND button 16 , then select FM1,
FM2, FM3 or AM.
2) Press and hold the BND button 16 for 2 sec-
onds or longer, then the display will show
“MANU,” which means that a manual selec-
tion function is on.
3) Press the Left/Right button 18 and select the
right station.
Seek Tuning
1) Press the BND button16 , then select FM1,
FM2, FM3 or AM.
2) If the “MANU” on the display is on, press and
hold the BND button 16 for 2 seconds or
longer. When the “MANU” display is off, the
Seek Selection function is on.
3) Press the Left/Right button 18 , then when it
selects the station in which there is a broad-
cast, it automatically stops.
Preset Memory Function
Preset Memory Function can store up to 24 sta-
tions: six stations for each of FM1, FM2, FM3
and AM.
Note:
When the present memory function is used, all the
content of the memory will be erased.
•
10
Manual memory function
Area Change
Use this function when you are using the car
stereo anywhere outside the U.S.
1) Press the BND button 16 , and select the
band you want to store in the memory.
2) Press the Left/Right button 18 then select
the station you want to store in the memory.
Switchable frequency spacing
This car stereo is initially set to tune in frequen-
cy intervals of 10 kHz for AM and 200 kHz for
FM, the standard calibrations in the U.S. When
using the unit outside the U.S., use the following
procedure to switch the frequency range.
The table below lists the frequency specifica-
tions for the U.S. and other countries.
3) Press and hold the Preset button
9
for 2
seconds or longer, then the station will be
stored in the memory.
Auto store function (Automatic Station Store)
1) Press the BND button 16 , then select the
band you want to store in the memory.
Initial Setting New Setting
(U.S. standard) (outside U.S.)
2) Press and hold the AS button
6
for 2 sec-
onds or longer, then the station at which the
reception is the strongest will be automatical-
ly stored in the memory.
Frequency
spacing
10 kHz
530 to
9 kHz
531 to
AM
FM
Note:
•
Frequency
range
When the number of stations stored is less than six,
the previous content of the memory for each direct
button will be retained.
1,710 kHz 1,629 kHz
Frequency
spacing
200 kHz
87.9 to
50 kHz
87.5 to
Preset Scanning (Preset Station Scan)
Frequency
range
When the PS button
5
is pressed, the preset
107.9 MHz 108 MHz
memory numbers flash and the stations are
tuned in for 7 seconds each in the order in which
they were stored. Press the PS button again to
cancel the preset scanning mode.
Switching the area change
Outside U.S. (New Setting)
While pressing the BND button
16
, press the RPT
14
button
, then “outside U.S.” will be selected.
Instant Station Recall (ISR)
With this function, a specific radio station can be
recalled from any mode.
Inside U.S. standard (Initial Setting)
16
While pressing the BND button
, press the
13
RDM button
selected.
, then the “U.S. standard” will be
ISR memory
1) Press the FNC button 3 , then select the
radio mode.
2) Select the radio station which you want to
store in the memory.
3) Press and hold the ISR button 7 for 2 sec-
onds or longer.
Recalling ISR
Press the ISR button
7
then the display will
show “ISR,” then the radio station previously
memorized will be selected. Press the ISR but-
ton
7
again to disengage the unit from the
Recalling ISR function.
11
|